Carbon Monoxide Detector
Features:
Loud 85 decible alarm.
Permanent carbon monoxide sensorPowered by one 9V battery (Carton Zine 6F22 or Alkaline 6LR61).The alarm sound pattern is pulsed three alarm beeps.This continues until the CO eliminated .The red LED will flash once every one second while in alarm mode.
Test button to teat the units electronics and verified proper unit operation RED LED light flashing once every 40 seconds to indicate normal operation mode.The CARBON MONOXIDE (CO) alarm monitors the air for the presence of CO.The alarm will sound and be accompanied by the flashing red LED light when there are high levels of CO present.
 Specification: Power Supply:9V alkaline battery 6LR61
Sensitivity Setting : 150+/-50ppm CO concentration
Standby Current:<35Ua
Alarm Current :<20Ma
Operation Ambient Condition:4~38Celsius degree , 25~85%R.H.

carbon monoxide detector GS832
Power: AC110V~AC240V/50Hz,60Hz
Mounting: Accessories supplied for wall mounting.
Alarm volume : ≥85db(A) at 1m
CO alarm pattern: BI--pause 0.5s--BI--pause 0.5S, with corresponding red LED flash. repeat this pattern
Fault alarm pattern:
1 short beeps - followed by 4 seconds of silence - followed by 1 short beeps with a corresponding red LED flash
Operating condition :
Operating Temperature : -10 ~ 50
Ambient Humidity : 10%~ 90% RH
Sensor : semiconductor CO sensor
Test/Reset Button :
Test button verifies proper unit operation
Power Consumption : ≤3 W
Type of gas be detected : Carbon monoxide
Alarm sensitivity: conforms to EN50291 standard
Output signal(optional) :
Wireless.without signal output
Quomodo of power supply input: AC plug pin
Packing size: 122mm x 80mm x 73mm
Weight:0.26kg

 Swimming pool alarm, Infra-red pool alarm, Anti-drowning alarm